2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Enbloc Dial.
4. Change the setting as required.
5. Press Save.
Related links
En-Bloc Dialing on page 36
Withholding Your Number
You can select to withhold your number on external calls.
• Your system administrator can configure whether you can access this menu.
Note:
• Use of this option depends on the external line provider. In some cases, attempting to
use this feature can causes calls to fail. If this occurs, the feature should be switched off.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Withhold Number.
4. Change the setting as required.
5. Press Save.
Related links
Making Calls on page 31
Adjusting the Call Volume
Whilst talking, you can adjust the volume of the incoming call. The volume is adjusted separately
for whichever device is in use (handset, headset or speaker).
Procedure
1. With the call connected, use the + plus and – minus keys to adjust the volume.
2. The display returns to normal after a few seconds.
Withholding Your Number
March 2023 Using 1408/1416 Phones on IP Office 37
Comments on this document? infodev@avaya.com
To Next Page
Loading...
