Avaya 1408 - Do Not Disturb Short Codes

Do Not Disturb Short Codes
Short codes are numbers that you can dial to enable and disable various features. The following
are default short codes that may be available. However, your system administrator can remove
and change the short codes available to you or all users. To use a short code, you may have to
put your currently call on hold.
These are useful as they can be dialed from any phone on the system. For example, this allows
you to login at a basic analog extension and still control a number of features.
Some short codes require you to enter some information when you dial them, typically an
extension number. That is indicated by N in the short codes shown below.
• For a list of other common dialing short codes, see Short Codes on page 155.
Do Not Disturb
Feature Dial Description
Switch Do Not Disturb On *08 Set your phone to 'do not disturb.'
Switch Do Not Disturb Off *09 Switch off 'do not disturb.'
Add a Do Not Disturb
Exception Number
*10*N# Add a number (N) to your list of 'do not disturb' exceptions.
Delete a Do Not Disturb
Exception Number
*11*N# Remove a number (N) from your list of 'do not disturb'
exceptions.
Cancel All Forwarding *00 Switch off any forwarding (includes 'forward unconditional,'
'forward on busy,' 'forward on no answer,' 'follow me,' and
'do not disturb').
Related links
Do Not Disturb on page 74
Do Not Disturb
March 2023 Using 1408/1416 Phones on IP Office 76
Comments on this document? infodev@avaya.com