Avaya 1408 - Forward on no Answer; Forward Unconditional

1408/1416 Phone User Guide Page 156
15-601040 Issue 07i (06 November 2015)IP Office 9.0
Comments on this document? infodev@avaya.com
18.5 Forward On No Answer
If your phone is set to forward on no answer , you can clear or change the forward settings through the Status
menu.
1.Press the Status soft key if shown. To access the status menu during a call, press the PHONE key and then
press the Status soft key if shown.
2.Use the up and down arrow keys to scroll the menu to Fwd NoAns.
· To switch off forward on no answer, press the Off soft key.
· To change the destination of the setting, press the Edit soft key.
· Use the up and down arrow keys to scroll through the following menu options:
· Use the left and right arrow keys to switch forward on busy as on or off.
· Use the left and right arrow keys to switch forward on no answer on or off.
· Use the left and right arrow keys to select which calls should be forwarded. The options are All
Calls or External Calls Only.
· The forward destination is shown. Press the Change soft key to enter a new destination or clear the
destination.
· If the current destination is shown in ( ) brackets, that indicates that the forward unconditional
destination is being used as no specific forward on busy/no answer destination has been set.
Selecting Change will set a forward on busy/no answer destination, it will not change the forward
unconditional destination.
Access Control
Your system administrator can configure whether you can access this menu option. See Menu Access Control .
18.6 Forward Unconditional
You can clear or change your forward unconditional settings through the Status menu.
1.Press the Status soft key if shown. To access the status menu during a call, press the PHONE key and then
press the Status soft key if shown.
2.Use the up and down arrow keys to scroll the menu to Fwd Uncon.
· To switch off forward unconditional, press the Off soft key.
· To change the forwarding settings, press the Edit soft key.
· Use the up and down arrow keys to scroll through the editing options.
· Use the left and right arrow keys to switch the forwarding on or off.
· Use the left and right arrow keys to select which calls should be forwarded. The options are
External Only, External and Group, Non Group Calls and All Calls.
· Select edit to change the number to which calls are forwarded.
Access Control
Your system administrator can configure whether you can access this menu option. See Menu Access Control .
187
184
184