1408/1416 Phone User Guide Page 66
15-601040 Issue 07i (06 November 2015)IP Office 9.0
Comments on this document? infodev@avaya.com
9. Headset/Handsfree Operation
9.1 Headset Operation
Your phone has a headset socket located under the phone. This is suitable for the connection of phone headsets that
connect via a HIS headset cable.
· If there are no currently connected call to which you are talking, a call answered by pressing its appearance button
is connected either handsfree or through the headset according to the phone's audio path setting .
· If there is already a connected call to which you are talking through the headset, answering another call by
pressing the appearance button will answer that call using the headset.
Using a Headset
To answer a call using a headset:
1.To answer a call using the headset, press the HEADSET button. The button remains lit whilst you have a call
connected on the headset.
To end a headset call:
1.To end a headset call, press the HEADSET button.
To switch from the headset to the handset:
1.To switch from the headset to the handset, simply lift the handset.
To switch to handsfree from the headset:
1.To switch to handsfree from the headset, press the HEADSET button. The button remains lit whilst you have a
call connected on the headset.
2.Replace the handset.
To switch from the headset to handsfree:
1.Press the SPEAKER button. See Handfree Speaker Operation .
To switch to headset from handsfree:
1.Press the HEADSET button. The button remains lit whilst you have a call connected handsfree.
To mute the call while on the headset:
1.Press the MUTE button. The button remains lit whilst the call is muted. Note that if you switch to the handset or
handsfree, the mute is automatically canceled.
Headset Operation Settings
You can adjust the following headset settings:
· Headset Volume
· Default Audio Path
· Headset Automatic Gain Control On/Off
67
68
67
67
67
To Next Page
Loading...
