Avaya 1600 Series - HTTP Configuration for Backup;Restore

Troubleshooting Guidelines
56 1600 Series IP Telephone Installation and Maintenance Guide
Router nnn.nnn.nnn.nnn Up to 15 ASCII characters:
the IP address of the router in use.
File server nnn.nnn.nnn.nnn.nnnnn Up to 21 ASCII characters: IP address
and port of last file server used
successfully during initialization or
“0.0.0.0” if no file server was used
successfully.
Call server nnn.nnn.nnn.nnn.nnnnn Up to 21 ASCII characters: IP address
and port of the call server currently in
use, otherwise “0.0.0.0.”
802.1X If DOT1X = 0
If DOT1X = 1
If DOT1X = 2
Pass-thru mode.
Pass-thru with Logoff.
Supplicant mode.
Group nnn Up to 3 ASCII numeric characters:
GROUP value.
Protocol: cccccccc
filename.ext
cccccccc Ethernet
bootcodename
Up to 8 ASCII characters, currently only
“H.323.”
4 to 32 ASCII characters (primary
application).
2 to 8 ASCII characters,
either"1000Mbps", “100Mbps”,
“10Mbps”, or “No.”
1 to 32 ASCII characters (backup image
name).
GigE Adapter cccccccccccccc 14 ASCII characters. Version identifier
of the GigE Adapter software, if
applicable.
Button Module 1 cccccccccccccc 14 ASCII characters. Version identifier
of the software in the first Button
Module, if applicable.
Table 1: Parameter Values (continued)
Name System Value Format
2 of 2