Avaya 1600 Series - Server Requirements

To Next Page

To Previous Page

H323 Telephone Installation Page 22

Issue 23e (Friday, February 15, 2019)IP Office™ Platform 11.0

Comments on this document? infodev@avaya.com

1.16.1 46xxspecials.txt

For systems using the auto-generated 46xxsettings.txt file, one option to add additional manual settings is to use a

file called 46xxspecials.txt. When such a file is added to the system, the command GET 46xxspecials.txt appears as the

last line of the auto-generated 46xxsettings.txt file requested by phones.

The 46xxspecials.txt file needs to be manually created and then placed on the phone file server. It can be a simple

text file containing a single command or a complex settings file with settings based on phone type, model and/or group.

To obtain an example of a complex structure, you can browse to http://<IPOffice>/46xxspecials.txt to obtain an auto-

generated file. Save and edit that file before uploading it back to the system.

1.16.2 NoUser Source Numbers

Most values in the auto-generated settings file are based on settings taken from the IP Office system configuration.

However, it may occasionally be necessary to add additional values to the auto-generated files. This can be done using

the values entered as NoUser source numbers.

Since these changes are applied to the values in the auto-generated 46xxsettings.txt file, they are overridden by any

setting entered in the 46xxspecials.txt file if present.

There are a number of NoUser source number settings used for remote extensions. They operate differently in that

they change existing values in the auto-generated settings file given to a phone when the system detects that the

phone requesting the file is a remote extension. See the "IP Office SIP Phones with ABSCE" manual.

Example NoUser Source Numbers

SET_46xx_PROCPSWD=X

This NoUser source number adds the command SET PROCPSWD X to the auto-generated settings file where X is the

password set.

SET_ADMINPSWD=X

This NoUser source number adds the command SET ADMINPSWD X to the auto-generated settings file where X is

the password set.

SET_HEADSYS_1

This NoUser source number adds the command SET HEADSYS 1 to the auto-generated settings file.

REM_BAKLIGHTOFF=N

This NoUser source number adds the command SET BAKLIGHTOFF N to the auto-generated settings file provided to

a remote extension. N is the timeout in minutes.

23 42

Other manuals for Avaya 1600 Series