H323 Telephone Installation Page 67
Issue 23e (Friday, February 15, 2019)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
Static Administration Options:
3.1 Administrator Process Password
Administrative phone processes are protected by the use of a process password, also known as the CRAFT password. The
password can be changed from its default by specifying the new value in the 46xxsettings.txt file.
If the telephones are downloading a 46xxsettings.txt file from a file server:
1. Add a SET PROCPSWD entry to the 46xxsettings.txt file followed by the password that should be used.
2. Cause the telephones to reboot in order to reload the settings files and use the new setting.
If the telephones are using the IP Office auto-generated settings:
1. Receive the IP Office configuration and locate the NoUser user.
2. In the Source Numbers tab, add SET_46xx_PROCPSWD= followed by the new password. Note that the
command is case sensitive.
3. Save the configuration and reboot the system.
To view the auto-generated file setting:
1. Using a browser, enter http://<server_address>/46xxsettings.txt.
2. The file should include a line starting SET PROCPSWD followed by the new password.
41
To Next Page
Loading...
