Avaya 1600 Series - Conference Details Screen for Ad-Hoc Conferences; Shuffling

Shuffling
Issue 5 April 2010 41
For additional information about administering the call server for 1600 Series IP Telephones,
see the following Avaya documents, available on the Avaya Support Web site:
● Administrator Guide for Avaya Aura™ Communication Manager (Document Number
03-300509).
● Feature Description and Implementation for Avaya Aura™ Communication Manager
(Document Number 555-245-770).
Conference Details Screen for Ad-Hoc Conferences
Conference Details allows the user to view parties on a conference call and selectively mute or
drop individual parties for a conference call setup.
If administered on an Expansion Module button, the BM32 Button Module must be connected.
To enable Conference Details capabilities:
1. On the Class of Restriction (COR) form make sure that Block Enhanced Conference/
Transfer Displays is set to No.
2. As described in On-Hook Dialing
, administer the Conference Display Feature Button to a
Phone button on the Phone screen.
Shuffling
Administer shuffling on three forms:
● Feature-Related Parameters form, shown in Figure 7. Set the Direct IP-IP Audio
Connections? field to y (yes).
● IP Network Region form, shown in Figure 11. Set both the Intra-region IP-IP Direct Audio
field and the Inter-region IP-IP Direct Audio field to y (yes).
● Station form, shown in Figure 4. Set the Direct IP-to-IP Audio Connection to y (yes). The
Station form setting overrides the network region, which overrides the system setting.