Avaya 1608 - Sending a Message

1608/1616 Phone User Guide Page 106
15-601040 Issue 11c (Thursday, April 16, 2020)IP Office
Comments on this document? infodev@avaya.com
13.3 Sending a Message
You can use visual voice to record and send a voicemail message to other users' mailboxes.
1. Press the MESSAGES button. Depending on how your system is configured, you may be required to
enter your voicemail password and then press the Done soft key. The visual voice menu is displayed.
2. Use the up and down arrow keys to scroll to the option Message.
3. Press the Select soft key or OK.
4. Enter the user to which you want to send the message.
5. Press the Message soft key.
6. When you are ready to start recording, press the Record soft key.
7. To stop recording, press the Stop soft key.
8. You can now use the following soft keys:
· Listen
Listen to the recording. You can use the Record option to record the message again.
· Submit
Send the message.
· More
Switch between the different sets of available soft key functions.
· Others
Add other extension numbers to which you want to send the message.
· Record
Record the message again.