Related links
Entering Text Characters on page 174
Entering Characters for Other Functions
• Select a character by re-pressing the indicated button until the required character is
displayed. Then:
- Pressing another button enters that character and moves to entering the next character
from the newly selected button.
- Pausing for more than a second after pressing a button also enters the current character
and moves to entering the next character.
• You can select the text entry mode. The current mode is shown by the soft-key label as
below. Pressing the soft-key switches text entry to the next mode:
- abc – Lower-case.
- ABC – Upper-case.
- Abc – Capitalized.
- 123 – Number only mode.
- Hex – Hexadecimal only mode.
• Use the left and right cursor keys to move the cursor.
• Press Bksp to delete the character before the cursor.
Related links
Entering Text Characters on page 174
Entering Characters for Other Functions
March 2023 Using 1608/1616 Phones on IP Office 175
Comments on this document? infodev@avaya.com
To Next Page
Loading...
