Using the Settings Editor
Issue 6, January 2011 125
Tab Contents - Admin Menu Contents - Config Menu
Profiles:
Silent
Vibrate
Loud
Soft
Custom
N/a Noise Mode
Ring in Speaker/Headset
Warning Tones
Key Tones
Push-to-Talk
(Ring option)
Telephone Ring
Message Alert 1
Message Alert 2
(Ring option settings)
Ring Cadence
Ring tone
Ring volume
Vibrate Cadence
Ring Delay
For user convenience and efficiency, when the Write Handset button is clicked, every
option set under the Handset settings column in all nine tabs is written at the same
time. Each tab’s options are NOT written separately. Be sure that you set all options
before copying the configuration to the handset.
Your handsets may have different options than those available in the Handset
Administration Tool. When a handset is placed in the cradle, it is checked for certain
features, such as the Regulatory Domain version. The HAT will turn controls on/off
based on the information that it gathers. If your handsets have options that are not yet
programmed into the HAT, those options will require manual setting if the factory
default is not desired.
To Next Page
Loading...
