Configuring the AVPP
Issue 6, January 2011 23
3.4 AVPP Configuration
The SVP-II Configuration screen is where you set the mode of the Avaya Voice Priority
Processor. It is also where you can lock the Avaya Voice Priority Processor for maintenance
and reset the Avaya Voice Priority Processor after maintenance. The type of gateway you
are using determines the mode of the Avaya Voice Priority Processor.
From the main menu, scroll to SVP-II Configuration and select by pressing Enter.
SVP-II Mode – Defaults to NetLink IP for an IP environment. Press enter to select and
the screen is immediately redrawn with additional options for the IP environment.
The following options must be configured:
To Next Page
Loading...
