Avaya 3641 - Configuration (Config) Menu

Avaya 3641/3645 Wireless IP Telephone Configuration
Issue 6, January 2011 73
4.4 Configuration (Config) Menu
The Avaya 3641/3645 Wireless IP Telephone features a Config (configuration) menu that
allows the end user to configure user preferences and display handset information. The
Config menu is opened by pressing the Cfg softkey from standby mode. See the end user
guide 21-601633.
The diagram below shows the options on the Config menu.
Config Menu
Options
2
nd
Level 3
rd
Level 4
th
Level 5
th
Level 6
th
Level
Lock Keys
User Profiles Silent
Vibrate
Loud
Soft
Custom
Set as Active
Ring Settings Telephone
Message Alert 1
Message Alert 2
Ring Cadence Off
PBX
Continuous
Short Pulse
Long Pulse
Ring Tone Tones 1-10
Ring Volume Volume

Vibrate Cadence Off
PBX
Continuous
Short Pulse
Long Pulse
Ring Delay No Delay
5 Second Delay
10 Second Delay
Noise Mode
5
Normal
High
Severe
Ring in Headset
Ring in Speaker
Warning Tones
Disable/Enable
Key Tones
Disable/Enable
PTT
6
Disable/Enable
5
High and Severe noise modes increase microphone, speaker, and ring volume settings above Normal mode baseline.
All measures are approximate.
Microphone In-ear speaker Ring volume
High +12dB +6dB +3dB
Severe +18dB +12dB +6dB
6
PTT will not appear on the Config menu if it has been disabled by the system administrator.