Part B: Avaya 3641/3645 Wireless IP Telephone
76 Avaya Voice Priority Processor, Avaya 3641/3645 Wireless IP Telephone, Handset Administration Tool
5. Software License and Protocol Management
The Avaya 3641/3645 Wireless IP Telephone System supports a number of different IP
protocol integrations. All Avaya 3641/3645 Wireless IP Telephones are shipped from
Avaya with the correct software. However it may be necessary to update the software.
Please see section Software Maintenance for more information.
The following details the process to properly configure Avaya 3641/3645 Wireless IP
Telephones and download software via over-the-air file transfer.
5.1 Minimum System Requirements
1. A wireless LAN must be properly configured and operational through the use of
802.11a/b/g/n wireless access points. Consult the VIEW Configuration Guide for the
appropriate make/model of WLAN.
2. The Avaya Aura™ Communication Manager must also be connected to your network
and completely operational.
3. A TFTP Server must be available on the network in order to load the appropriate
software into the Wireless IP Telephones. The current handset software must be
installed in the proper TFTP download directory.
4. If SVP is used for QoS, the AVPP Server is installed and properly configured.
5. Software versions required:
Component Version
AVPP 17x.028 or higher
OAI Server MOG 600 54.032 or higher
OAI Server MOG 700 82.017 or higher
6. If Wi-Fi Standard QoS is used, then each AP must be configured for such features as
WMM-Power Save; WMM-Admission Control; proper EDCA parameters; DSCP mapping
for voice and control traffic; call admission control and Proxy ARP. Consult the
appropriate VIEW Configuration Guide for settings.
7. If WPA2-Enterprise is used, then all portions of the Public Key Infrastructure (PKI)
need to be installed and configured properly in order acquire the network.
8. Finally, ensure that the Battery Pack on the Wireless IP Telephone is fully charged.
To Next Page
Loading...
