1. Installation
3600 Series IP Phone Installation Page 17
IP Office 4.0 15-601082 Issue 05a (22nd May 2007)
1.2 TFTP Server Installation
A TFTP server is required to update the software in both the AVPP and in the 3600 Series phones.
Whilst the IP Office Manager application can provide basic TFTP support it is not recommend for support
of AVPP units and 3600 Series phones.
Any third-party TFTP application can be used to provide TFTP support. Such an application is available
from Avaya. Perform a search for TFTP on the http://support.avaya.com web site to download this
application and full instructions for its usage.
If IP Office is being used for DHCP, the IP address of the PC running the TFTP software should be set in
IP Office configuration. If using a alternate DHCP server, the IP address of the PC running the TFTP
software should be set in the 176 options scope for the H.323 IP phones.
Materials Required
1. TFTP Server Software
2. Server PC
With fixed IP address and meeting specification of chosen TFTP software
Tools Required
1. Access to an additional network PC from which TFTP server operation can be tested.
Information Required
1. IP Address of the TFTP server PC.
Process
1. Download and install on a suitable server PC the selected TFTP server software. This PC should
have a fixed IP address within the network. Note that address if not already known. The address
is required for both AVPP and phone configuration.
2. If using the Avaya provided TFTP server,
1. Select System | Setup and select the Outbound tab.
2. Set the Outbound file path to the folder location where you want to place the AVPP and
3600 Series phone software files.
3. Unpack the AVPP and 3600 Series phone software files and place them into the folder setup on
the TFTP server as its root folder.
4. Test and check TFTP operation from another PC on the network. A TFTP client can be run from
the Windows by select Start | Run and entering cmd. Then enter TFTP for instructions.
To Next Page
Loading...
