2. AVPP Installation and Configuration
3600 Series IP Phone Installation Page 25
IP Office 4.0 15-601082 Issue 05a (22nd May 2007)
AVPP Configuration Menu
NetLink SVP-II System
When you connect via the serial port for the first time the following main menu is displayed. Once a
name for the AVPP has been entered, on subsequent accesses a screen confirming the name and IP
address of the unit is displayed until Enter is pressed.
• System Status
Menu for viewing error messages, status of operation and software code version. You can check
the version currently installed on AVPP through the System Status menu, see Software Version.
• SVP-II Configuration
Allows you to set the mode and reset the system.
• QoS Configuration
This sub-menu of the SVP-II Configuration menu is used to alter the QoS settings applied
to different signals.
• Network Configuration
Allows you to set network configuration options, including IP address and hostname.
• Change Password
Allows you to change the password for AVPP access.
To Next Page
Loading...
