Avaya 3641 - Page 27

Customizing your Avaya 3641/3645 IP Wireless Handset Configuration
Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012 27
Config menu
2nd level
3rd level
4th level
5th level
6th level
SNMP*
Push-to-talk †
Default Channel
Channel 1
….
Channel 24
Subscribed
Channels
Channel 1
Channel 2
Channel 3
….
Channel 24
PTT Audio Volume
Audio Volume

PTT Tone Volume
Tone Volume

PTT Vibrate
Enable/Disable
System Info
Phone IP Address
Alias IP Address
SVP IP Address
OAI IP Address
Firmware Version
Emergency Dial ‡
Number
Name
* The SNMP menu option is password protected and is designed for system
administrator use when troubleshooting.
† (Avaya 3645 IP Wireless Handset model only) Push-to-talk must be enabled by the
system administrator before it can be activated by the user. If it is not enabled, then it
will not appear on the Config menu. If PTT has not been enabled, Emergency Dial
may be. Check the System Info options to determine if Emergency Dial appears. If so,
it is active.
‡ (Avaya 3645 IP Wireless Handset model only) Emergency Dial will appear if it has
been enabled by the system administrator. The Emergency Number/Name options
allow you to check the number and name that is dialed when the Emergency Dial
button is pressed twice in two seconds.