Avaya 3641 - Default Settings; Toggle Options

28 Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012
Default settings
The profile options on the Config menu may be reset to their default values by the
system administrator. These are the default settings:
Setting/profile
Silent
Vibrate
Soft
Loud
Custom
Language
English
English
English
English
English
Ring Cadence
Off
Off
PBX
PBX
PBX
Ring Tone
Tone 1
Tone 1
Tone 1
Tone 1
Tone 1
Ring Volume
1
1
3
7
5
Vibrate Cadence
Off
PBX
Off
Off
PBX
Ring Delay
0
0
0
0
5
Noise Mode
Normal
Normal
Normal
Normal
Normal
Headset/Speaker
Speaker
Speaker
Speaker
Speaker
Speaker
Key Tones
Off
Off
On
On
On
Warning Tones
Off
Off
Off
Off
Off
Push-to-talk *
Off
Off
On
On
On
PTT Vibrate †
Disabled
Disabled
Disabled
Disabled
Disabled
Emergency Dial ‡
On
On
On
On
On
* Push-to-talk must be enabled by the system administrator before it can be activated
by the user. If it is not enabled, then it will not appear on the Config menu and will not
be ―On‖ for any profile.
† PTT Vibrate is available only when Push-to-talk has been enabled by the system
administrator.
‡ Emergency Dial must be enabled by the system administrator. If enabled, it will be
―On‖ (or available for use) in every profile.
Toggle options
Some menu items have only two options, which operate on a toggle basis. The current
setting is shown below the menu heading on the info line. The other available setting is
highlighted in the menu list. Press Nav OK to activate the highlighted setting.
For example, when predial is disabled, the info line displays Predial Disabled and the
highlighted menu item is the Enable Predial option. Press Nav OK to enable predial. The
info line will change to display Predial Enabled.
In another example, when the info line displays Ring in Speaker, the highlighted menu
option is Ring in Headset, Press Nav OK to select Ring in Headset, The ring will now
sound in the headset and the info line will change to Ring in Headset.