Avaya 3641 - Lock Keys; User Profiles; Set as Active; Ring Settings

Customizing your Avaya 3641/3645 IP Wireless Handset Configuration
Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012 29
Lock Keys
When enabled, the Keypad Lock option will lock the keypad immediately. If the keypad is
locked, it may be unlocked by pressing the Unlk softkey and then the # key.
User Profiles
Your handset ring behavior is established by the five User Profiles: Silent, Vibrate, Loud,
Soft and Custom. The currently-active user profile is shown on the standby display. If you
want to quickly switch to a different profile, while in standby press the Prof softkey and
select a different profile from the list. The currently-active profile is marked with an
asterisk (*).
Set as Active
You can change to a different User Profile from the Config menu by selecting the desired
profile and then selecting Set as Active and pressing the Nav OK key. This activates the
new User Profile.
Ring Settings
The Ring Settings option allows the user to set the ring for three separate functions.
Telephone Ring is used for usual telephony functions. Message Alert 1 and Message
Alert 2 may be used to set different ringing patterns for custom applications.
Telephone Ring
The telephone ring setting allows the user to set a distinctive ring rhythm, tone, volume
and sequence. Select from an audible ring, a vibrate-only ring or a vibrate ring
accompanied by an audible ring.
Ring Cadence The ring cadence is the rhythm of the ring. It may be set to a pre-
programmed ring cadence, or it may be set to obtain its cadence from the SIP proxy
server. The PBX option is designed to utilize any distinctive rings sent by the proxy
server while allowing the user to set unique rings for auxiliary applications.
Off: Silent
PBX: The PBX, also known as the SIP call server, determines ring cadence (e.g. the
call server may send rings that differentiate between internal and external calls)
Continuous: Rings continually until answered
Short Pulse: Rings in short bursts
Long Pulse: Rings in long bursts
Ring Tone Scroll and select from ten available tones. The Play softkey allows the user
to preview the tone before selecting. If Ring Cadence is turned off, the Ring Tone option
will not appear on the menu.