Avaya 3641 - Resume a Call on Hold from Standby; Navigate Among Call Tabs; Forward Calls

40 Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012
Resume a Call on Hold from Standby
Press the Resm softkey. If more than one call is on hold, use the Nav  keys to select
the call you wish to resume and press the Resm softkey or Nav OK.
Navigate among Call Tabs
Use the Nav◄► keys.
Forward Calls
Calls may be forwarded on a per-line basis. The Line menu display will indicate if a line
is forwarded by a > character followed by the destination address.
When a line is forwarded, the standby screen displays the forwarding status,
unless the do-not-disturb feature is enabled.
If your handset has multiple lines, set or clear forwarding for each line
individually.
▬▬▬▬▬▬▬▬▬
1. Press START, or press LINE and select the line number that you want to be
forwarded.
2. Press FCN.
3. Select the Set/Clear Forward option from the FCN menu.
4. Enter the forwarding number for the indicated line.
5. Press Nav OK to save.
▬▬▬▬
Note:
If calls are forwarded through the wireless telephone and it goes out of range, is turned
off or otherwise loses contact with the call server, call forwarding cannot be
accomplished. Use a deskset to forward calls or do not turn off your handset.