Avaya 3641 - Make a Speed Dial Call; Assign a Speed Dial Number

Using the Advanced Features of your Avaya 3641/3645 IP Wireless Handset
Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012 55
Make a speed dial call
▬▬▬▬▬▬▬▬▬
1. From standby or while in the speed dial menu, press and hold the
corresponding number key on the keypad for one second. The system speed
dial key must be pressed for three seconds.
2. The handset will display the name and number for one second before the call
is dialed. You may press END during this second to terminate the call. (You
may also use the Nav keys to highlight an entry and then press START or the
Spkr softkey to dial the number.)
▬▬▬▬
If you do not place a call, you may return to standby by pressing the Exit softkey.
Assign a speed dial number
A phonebook entry may be assigned to a speed dial key from the phonebook edit
number display.
Phonebook
spdl [x]
Doe, John
number
3001
Spkr
Spdl
Edit
Exit
▬▬▬▬▬▬▬▬▬
1. Press the Spdl softkey from the view number display in the phonebook.
2. When the speed dial list opens, navigate to an empty slot and press Nav OK.
This sets the speed dial key to the number in the phonebook.
3. Press END to exit to standby mode and save the speed dial number
assignment.
▬▬▬▬
Speed dial entries may be edited through the phonebook, as described above.