Avaya 3641 - Make a PTT Call; Respond to a PTT Call; End a Wait Period; Select a Different PTT Channel

58 Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012
Make a PTT Call
To call on the default channel, from standby mode press and hold the TALK button. Wait
for the display to show Transmitting and then hold the handset approximately two inches
from your mouth and speak.
Note:
If no default channel is set, when you press the Talk button a channel list will display and
you must select a channel before you can transmit.
Respond to a PTT Call
Press and hold the TALK button during the 10-second wait period.
End a Wait Period
Press the END key.
Select a Different PTT Channel
Press and release the TALK button. Use the Nav keys or up/down side buttons to
highlight the desired channel. Press TALK to transmit.
End One PTT Call and Start another on a Different
Channel
Press the END key to exit the PTT call. Press and release the TALK button and select a
different channel from the list. Press and hold the TALK button to begin transmitting on
the different channel.
Receive a PTT Call while on a Telephone Call
If a PTT call comes in while you are on a telephone call and you do not wish to end the
call, press Hold to place the call on hold and then press the END key. You can now hear
the PTT broadcast. Press the Rsme softkey to resume the telephone call and silence the
PTT broadcast.
To end the telephone call and listen to the PTT call, press the END key. Now you can
hear the PTT call.