Callout number Name Button Icon Description
13 Headset connector The headset connector is for
connecting a headset. The
connector is protected against
dust by using the headset
connector cover.
This is a system dependent
feature.
Avaya 3730 DECT handset
Important:
The handset may retain small magnetic objects around the mouthcap or earcap region.
Parts of the handset Description
Case The plastic cover parts are made of durable PC/ABS material.
Antenna The antenna is integrated inside the handset.
Loudspeaker The handset has a separate loudspeaker for the loudspeaker
function. The loudspeaker is placed on the back side of the handset.
Microphone The microphone is placed on the front bottom side of the handset.
Clip There are two different belt clip options to the handset: a hinge-type
clip (standard) or a swivel-type clip.
Use the clip to attach the handset to a belt or similar.
You can use the handset without any clip.
Battery The battery is a rechargeable Li-Ion battery, placed under a battery
cover. The battery is fully charged within four hours.
Functions
Note:
Some functions are license or system dependent or require settings in the handset by the
administrator via WinPDM or Device Manager.
Avaya 3730 DECT handset overview
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 12
Comments on this document? infodev@avaya.com
To Next Page
Loading...
