Starting a conference call
About this task
The person initiating the conference call is the conference leader, and the others are the participant
members of the conference call.
Before you begin
Start a call with a participant.
Procedure
1. During the call, press the soft key R.
The first call is put on hold.
2. Dial the number.
3. When you connect to the call, press More.
4. Select conference.
5. Press Select.
The system displays conf.
The three callers are on a conference call.
6. (Optional) To add more than three callers on a conference call, repeat steps 1 to 5.
Toggling between calls
Before you begin
Start a call.
Procedure
Do one of the following:
• Press R.
• Press More and select Call waiting.
The first call is put on hold while you talk to the second caller.
After the second caller drops the call, you reconnect to the first call.
Answering Call waiting
About this task
Use this procedure to answer a Call waiting.
Menu operation
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 36
Comments on this document? infodev@avaya.com
To Next Page
Loading...
