Avaya 3730 - Adding a Contact

5.
Press Call or the Off-hook ( ) key.
Adding a contact
Procedure
1. Press Menu.
2. Select Contacts.
3. To add a new contact, select Add contact > New.
4. Select Name and press Add.
5. In the Name field, enter the name for the contact, and then press OK.
6. Select one of the following:
• Work number
• Mobile number
• Other number
7. Press Add.
8. Press OK.
9. Press Save.
Adding a contact from the call list
Procedure
1. Press Menu.
2. Select Contacts.
3. Select Add contact > From call list, and then select a number from the call list.
4. Press Add.
5. Select any of the following:
• Work number
• Mobile number
• Other number
6. Press Add.
7. Enter the name for the contact, and then press OK.
8. Press OK.
If the Force stimuli ringing is enabled, the handset uses the system-provided ring signals
instead of the local ring signals. This function is applicable in legacy systems only (stimuli).
9. Press Save.
Managing contacts
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 41
Comments on this document? infodev@avaya.com