Chapter 6: System Handling
Software upgrade and additional features
The administrator can upgrade the software and additional features or parameters in the handset by
using the WinPDM or Device Manager. The following are examples of additional features that you
can configure:
• Company phonebook
• Downloadable languages
• Customizing the menu tree
The license(s) can also be added via the Admin menu in the handset.
To view the handset’s software version, press *#34# in the idle mode.
Handset updates via the charging rack
Whenever there are updates for the handset, you are instructed to leave the handset in a central
charging rack so that the handset can be updated with new features and functions. During an
update, the handset displays the icon and the Updating handset message. You can close
the message by pressing OK.
If you remove the handset from the charger to use it, the update is suspended. The update is
resumed when the handset is again placed into the charger.
When the update is complete, the handset displays the Handset is updated message. You can
close the message by pressing OK.
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 43
Comments on this document? infodev@avaya.com
To Next Page
Loading...
