Avaya 3730 - Activating Automatic Phone Lock; Deactivating Automatic Phone Lock

Activating automatic phone lock
About this task
The handset can be protected for unauthorized use. If this function is set to On it locks automatically
a short time after the last keystroke and a PIN code has to be entered at power on. When it is set to
On in charger it locks when switched off or placed in a charger. The default phone lock code (0000)
can be changed to any 4 to 8 digit personalized code.
The following functions are still available when the handset is locked:
• Answering calls
• Dialing emergency call numbers
Procedure
1. Press Menu.
2. Select Settings.
3. Select Locks > Phone lock > Auto phone lock.
4. Select one of the following:
• On
• On in charger
5. Enter a PIN code of your choice, and then press OK.
The code should be of minimum four digits and maximum eight digits.
Note:
If you forget the PIN code, it can be reset by your distributor.
6. Enter a PIN code and press OK.
Note:
If the PIN code is forgotten it can be removed by your administrator.
The emergency number needs to be set by your system administrator
Deactivating automatic phone lock
Procedure
1. Press Menu.
2. Select Settings.
3. Select Locks > Phone lock > Auto phone lock.
4. Select Off.
Phone Lock settings
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 53
Comments on this document? infodev@avaya.com