2. Select Settings.
3. Select System.
4. Press Next.
5. In the System name field, enter the system name.
6. Press Next.
7. Select Integral Enterprise.
For non-Avaya compatible DECT systems, select other.
8. Enter PARK code.
Do not enter a # key after the code.
9. Enter AC code. The AC code length must be between 4 - 8 digits.
10. Press Next.
The system displays the Protection on? message.
11. To protect the new system, select Yes or No.
Note:
You cannot delete a protected subscription.
12. Press OK.
A searching mode starts.
Note:
A restart occurs automatically, when the handset subscribes to the new system.
Unsubscribing the system
About this task
Use this procedure to delete a system subscription.
Procedure
1. Press Menu.
2. Select Settings.
3. Select System.
4. Select Unsubscribe.
5. Select Delete.
You cannot delete a protected subscription.
Customizing Avaya 3730 DECT handsets
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 56
Comments on this document? infodev@avaya.com
To Next Page
Loading...
