Figure 6: Screw the swivel—type clip into position
Easy Replacement of Handset
Easy replacement can be used if a handset needs to be replaced due to, for example, a broken
display.
Note:
Easy replacement is not supported when using DP1 Desktop Programmer.
Note:
If the electrical connection is damaged, it is not possible to follow the Easy Replacement
procedure. Depending on the fault, it might work to do a replacement through WinPDM or
Device Manager.
The following settings are replaced during easy replacement:
• DECT registration
• User parameters (including User ID)
• Contacts
• The extension number is assigned to the new handset.
The following settings are not replaced during the easy replacement:
• Call list
Easy Replacement of Handset
July 2017 Using Avaya 3730 DECT handsets connected to Avaya Integral Enterprise Software
IEE 7.2 61
Comments on this document? infodev@avaya.com
To Next Page
Loading...
