In call
The In Call menu displays a list of functions that can be accessed during a call. To see the available
functions, press the More soft key. Some functions are always provided and others may be made
available by the administrator using the WinPDM or Device manager. To use a function, navigate the
In Call menu to highlight the required function and then press the Select soft key.
Note:
If the handset is configured using the WinPDM or Device Manager, a predefined emergency
number can be called while the handset or the keypad is locked. If calling from a locked
handset, only the Microphone on/off function in the In Call menu is accessible. However, the
entire In Call menu is accessible when calling from a handset with locked keypad.
Menu Tree
July 2017 Using 3730 DECT Handsets with Communication Manager and IP Office 26
Comments on this document? infodev@avaya.com
To Next Page
Loading...
