Procedure
Do the following:
• Press More > DTMF > Select.
DECT Info
DECT info is an advanced function intended for an administrator using the handset to measure RF
link and system parameters as part of a troubleshooting or site surveying procedure.
This option is only visible if the Admin menu is activated.
Using the loudspeaking function
About this task
To activate the loudspeaking function depends on the choice of answering method.
Procedure
1. Do any of the following:
• To receive in incoming call, press the left soft key.
• During a call, press the left soft key.
2. (Optional) To turn the loudspeaking function off, press the left soft key.
Managing outgoing calls
Making a local call
Procedure
1. Enter the number.
2.
Press Call or the Off-hook (
) key.
The system displays the number while dialling.
3. (Optional) Do the following as required:
• To erase the number, press Clear.
• To step, add or delete the digits from the middle of a number, use the navigation key.
• To turn the tone sender on in a pre-dialled number, long press the Key lock, and Upper
and Lower case( ) key.
Menu operation
July 2017 Using 3730 DECT Handsets with Communication Manager and IP Office 42
Comments on this document? infodev@avaya.com
To Next Page
Loading...
