Calling a number from contacts
Procedure
1. Press Menu.
2. Select Contacts.
3. Select Call contact.
4. Select a contact from the list, or search a name or number by entering the characters in the
Search field.
5. (Optional) To search for a contact, you can temporarily change the input language by long
pressing the Key lock, and Upper and Lower case ( ) key. This can be used to access
characters in a foreign language temporarily.
6.
Press Call or the Off-hook ( ) key.
Note:
Contacts can also be accessed by pressing the soft key in idle mode. The middle
soft key is by default configured to access the contact list, but can be configured to
access the Central phonebook or the Contacts menu. The Soft key is configured in the
handset using WinPDM or Device Manager.
Calling a contact from the local or company phonebook
Procedure
1. Press Menu.
2. Select Contacts.
3. Select Call contact.
The local and company phone book contacts appears in the same list. The company names
are indicated by the Locked entry ( ) icon for identification.
4. Select a contact from the list, or search a name or a number by entering the characters in
the Search field.
5.
Press Call or the Off-hook (
) key to call the contact.
Note:
The company phonebook can be accessed by pressing the Call Contact list ( ) soft
key in idle mode.
Menu operation
July 2017 Using 3730 DECT Handsets with Communication Manager and IP Office 44
Comments on this document? infodev@avaya.com
To Next Page
Loading...
