7. Press Add.
8. Enter the numbers.
You can include a tone or a pause in the phone number by pressing the Space key five
times or seven times. In the display, a tone is indicated by a “T” and a pause by a “P”.
9. Press OK.
10. Press Save.
Adding a contact from the call list
Procedure
1. Press Menu.
2. Select Contacts.
3. Select Add contact > From call list, and then select a number from the call list.
4. Press Add.
5. Select any of the following:
• Work number
• Mobile number
• Other number
6. Press Add.
7. Enter the name for the contact, and then press OK.
8. Press OK.
If the Force stimuli ringing is enabled, the handset uses the system-provided ring signals
instead of the local ring signals. This function is applicable in legacy systems only (stimuli).
9. Press Save.
Editing a contact
About this task
Use this procedure to edit local contacts.
Procedure
1. Press Menu.
2. Select Contacts.
3. Select Edit contact.
4. Select the contact, and press Edit.
You cannot edit a company phonebook contact. These contacts are indicated by the
icon
before their name.
Menu operation
July 2017 Using 3730 DECT Handsets with Communication Manager and IP Office 46
Comments on this document? infodev@avaya.com
To Next Page
Loading...
