Avaya 3730 - Activating and Deactivating Phone Lock; Changing the PIN Code

Call answering settings
The default setting for the handset is to use the Off-hook key to answer a call. However, the
handset can be configured to answer the call automatically, that is, without pressing a key and in
loudspeaking mode if required. Other keys can also be setup to answer a call. If Any key is
selected, any key, except the On-hook key and the Sound off key, can be used to answer a call.
Setting the call answering key
Procedure
1. Press Menu.
2. Select Settings.
3. Select Answering > Answering key.
4. Select any of the following:
• Call key
• Any key
5. Press Back to save the settings.
Setting the call answering behavior
Procedure
1. Press Menu.
2. Select Settings.
3. Select Answering > Answer behavior.
4. Select any of the following:
• Automatically
• Loudspeaking
5. Press Change to change the setting.
The check box is selected.
6. Press Back to save the settings.
7. (Optional) To remove the settings, press Change.
The check box is cleared.
Customizing Avaya 3730 handset
July 2017 Using 3730 DECT Handsets with Communication Manager and IP Office 62
Comments on this document? infodev@avaya.com