Avaya 3730 - Page 2

Functions 3730 DECT
handset
Enhanced DECT Security
Easy replacement of handset
Dynamic output power
Icons
Icon Name
Signal strength
Full battery
Voicemail message
Microphone off
Loudspeaking
Loudspeaking off
Sound off
Headset
Missed call
Incoming call
Outgoing call
System connection
Key lock
Table continues…
Icon Name
Phone lock
Handset menu and keys
Menu icons
1
2
3
Callout number # Name
1 Calls
2 Settings
3 Contacts
Navigating the menu
1. To move around in the menu structure, use the
Navigation key.
2. For choices in the menu, use three soft keys below
the display.
The function of each soft key is explained by text in
the soft key field in the display.
Soft keys
The three soft keys below the display can be defined for
specific functions such as dialling a specific number.
Basic functions
Switching the handset on
1.
Press and hold the On-hook and On/Off ( ) key.
The handset vibrates when it is on and the display
lights up followed by a confirmation message.
2. Press
Yes.
Switching the handset off
The handset must be in an idle mode.
1.
Press and hold the On-hook and On/Off (
) key.
The system displays the Switch off? window.
2. To confirm, press Yes.
If a handset is shared and one of the users logs off
the shared handset, the lock that prevents the
handset from unauthorized use is deactivated.
Charging the battery
To charge the battery, place the handset in any of the
following:
• Desktop charger: In a desktop charger the handset
is fully operational. The handset does not vibrate in
charger.
• Charging rack
You can also charge the handset in a separate
battery pack charger.
Charging below 5°C will harm the battery and
shorten the lifetime.
Replacing the battery
If the standby time for the handset becomes too low,
replace the battery by a new battery.
Contact the system administrator or handset supplier
for information about new batteries.
Making a call
To dial the number and make a call, do any of the
following:
• In standby mode, dial the number and press the
Off-hook key, or the soft key Call.
• Press the Off-hook key and select number from the
Call list.
• Press a soft key.
• To dial a number from the local phone book, enter
Contacts > Call contact. Select the name from the
list and press Call or the Off-hook key.
• To dial a number from the Central phone book,
enter Contacts > Central phonebook. Search by
Name orNumber or Last result, and press Search.
Press Off-hook key, or the soft key Call.
The alpha-numeric keys can be programmed with a
handset number.
2