Callout number Name Button Icon Description
13 Headset connector The headset connector is for
connecting a standard 3.5 mm
headset. The connector is
protected against dust by
using the headset connector
cover.
This is a system dependent
feature.
Parts of Wireless Handset 3730
Important:
The handset may retain small magnetic objects around the mouthcap or earcap region.
Parts of the handset Description
Case The plastic cover parts are made of durable PC/ABS material.
Antenna The antenna is integrated inside the handset.
Loudspeaker The handset has a separate loudspeaker for the alerting and hands
free function. The loudspeaker is located on the back side of the
handset.
Microphone The microphone is located on the front bottom side of the handset.
Clip There are two different belt clip options for the handset: a hinge-type
clip (standard) or a swivel-type clip.
Use the clip to attach the handset to a belt or similar.
You can use the handset without any clip.
Battery The battery is a rechargeable Li-Ion battery, located under a battery
cover. The battery is fully charged within four hours.
Functions
Note:
Some functions are license/system dependent or require settings in handset via WinPDM/
Device Manager.
Avaya Wireless Handset 3730 overview
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 12
Comments on this document? infodev@avaya.com
To Next Page
Loading...
