• Carrying case
• Belt Clip
- hinge-type
- swivel-type
• Security cord
• Headset with microphone on boom
• Headset with microphone on cable
DC3 Desktop Charger and DP1 Desktop Programmer
Figure 1: Chargers
You can use any of the following chargers:
• DC3 Desktop charger: Charges the handset only. The charger is delivered with a plug-in
power supply and connected to an ordinary wall socket.
• DP1 Desktop Programmer: Downloads new software and synchronizes parameters. The
handset becomes fully operational when you keep it in a charger.
Note:
Use the charger within the temperature range of +5° C – +40° C.
CR3 Charging Rack
The CR3 Charging Rack is used for:
• Charging several handsets
• Synchronizing parameters
• Downloading software
Avaya Wireless Handset 3730 overview
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 14
Comments on this document? infodev@avaya.com
To Next Page
Loading...
