Wireless Handset 373x Accessories
Belt Clips
The two belt clip options are:
• Hinge-type clip: The clip on the back of the handset is used to fasten the handset to a belt or
similar. The clip can also be changed to a swivel-type.
• Swivel-type clip: The ordinary belt clip can be replaced with a special swivel-type belt clip that
is adapted to firmly secure the handset into your belt.
Security Cord
The security cord is 800 mm long and is attached directly to the handset.
Carrying case
The carrying case is especially designed for the handset and includes a swivel type belt clip. The
handset is fully operational while located in the carrying case.
Headset
A headset is recommended if the handset is frequently used or the user want to have both hands
free.
The headset comes in the following two versions:
• Microphone integrated in the cable
• Microphone on a boom
In order to achieve optimal audio quality with the different headset types it is recommended to
select the corresponding headset profile. See
Changing the headset profile on page 15.
Changing the headset profile
About this task
The default setting is microphone on a boom, that is, the audio is optimized for using a headset
with microphone on a boom. Use the following procedure to change the headset profile in the
menu.
Procedure
1. Select Headset.
2. Select the corresponding headset profile from the following list:
• Mic on boom
• Mic on cable
• Hearing protection
• Customized headset profile: Only visible if the headset profile has been configured in
the WinPDM or Device Manager.
3. Press Select.
Accessories
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 15
Comments on this document? infodev@avaya.com
To Next Page
Loading...
