Icons and text in the display
All functions and settings available to the user are shown as icons and text in the display. The
icons and text in the display indicate functions and settings to which you have access. The display
normally displays date and time, the Owner ID and telephone number. The Owner ID can
manually be set by the user.
Soft key bar
Active area
Header bar
Status bar
Figure 2: Example of a display configuration in stand by mode
Name Description
Status bar This is the top row that is used for icons which provide information for signal
strength, missed calls, new messages, phone lock, key lock, sound off, time
and battery status. This row is always visible in all screens.
Header bar This row displays the current date, headset connection, and system connection.
Active area This row contains information such as, profiles, the name of the system to
which the handset is connected. A user identity provided from the system
and/or an Owner ID can also be displayed if configured in the Settings menu.
This is also the area for pop up text for example, missed calls or to confirm an
action.
Soft key bar This row is used for soft keys that can be used as shortcuts for functions in the
handset.
Scroll bar This is the bottom row that is located to the right side of the active area. It
becomes visible when a menu screen has more than six menus, or if the
complete text in a message cannot be displayed on the screen simultaneously.
Icons
Icon
Name Description
Signal strength This icon is visible in the upper
left corner. The number of bars
shown on display depends on the
signal strength.
Table continues…
Avaya Wireless Handset 3730 overview
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 16
Comments on this document? infodev@avaya.com
To Next Page
Loading...
