3. Select Call list, and then select a number.
The system displays the call list that you can scroll using the navigation key up and down.
4. Press Call or the Off-hook (
) key to dial the selected number.
Calling a number from contacts
Procedure
1. Press Menu.
2. Select Contacts.
3. Select Call contact.
4. Select a contact from the list, or search a name or number by entering the characters in
the Search field.
5. (Optional) To search for a contact, you can temporarily change the input language by long
pressing the Key lock, and Upper and Lower case (
) key. This can be used to
access characters in a foreign language temporarily.
6. Press Call or the Off-hook ( ) key.
Note:
Contacts can also be accessed by pressing the soft key in idle mode. The middle
soft key is by default configured to access the contact list, but can be configured to
access the Central phonebook or the Contacts menu. The Soft key is configured in
the handset using WinPDM or Device Manager.
Calling a contact from the local or company phonebook
Procedure
1. Press Menu.
2. Select Contacts.
3. Select Call contact.
The local and company phone book contacts appears in the same list. The company
names are indicated by the Locked entry (
) icon for identification.
4. Select a contact from the list, or search a name or a number by entering the characters in
the Search field.
Managing outgoing calls
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 43
Comments on this document? infodev@avaya.com
To Next Page
Loading...
