Avaya 3730 - Phone Lock Settings; Phone Lock Configuration

Setting the date format
Procedure
1. Press Menu.
2. Select Settings.
3. Select Time & Date.
4. Select the date format. The options are:
• DD/MM/YYYY, for example, 17/09/2016 (also called Europe)
• MM/DD/YYYY, for example, 9/17/2016 (also called US)
• YYYY-MM-DD, for example, 2016-09-17 (ISO 8601)
• MMM DD YYYY, for example, Sep 17 2016
• DD MMM YY, for example, 17 Sep 16
• DD.MM.YYYY, for example, 17.09.2016
• DD-MM-YYYY, for example, 17-09-2016
5. Press Select to save the settings.
Phone lock settings
The handset can be protected from unauthorized use by activating the automatic phone lock. You
can configure one of the following options for automatic phone lock:
If this function is activated, a PIN code has to be entered for example to switch on the handset, to
answer an incoming call, and so on.
• On: The handset is automatically locked if it is not used before the specified auto-lock time
expires, or when it is first turned on. The auto-lock time is specified in the Auto lock time
parameter.
• On in charger: The handset is locked immediately when located in the charger.
• Off: The handset is never locked.
You can change the default phone lock PIN code (“0000”) to a code of your choice. The code
should be of minimum four digits and maximum eight digits.
The Auto lock time parameter specifies the time after which the handset is automatically locked.
The shortest value is five seconds and the longest is three minutes.
Phone lock settings
November 2021 Using Avaya Wireless Handset 3730 with Communication Manager and IP Office 61
Comments on this document? infodev@avaya.com