Avaya 8410B - Conference; Add Another Party to a Call

{confirmation tone}
4. If you are returning to a call parked at your telephone, dial your own extension.
Note: If you receive an intercept tone, the parked call has been disconnected or retrieved by someone else.
To answer a call placed to your pickup group when your phone is idle:
1. Press
CallPickup
.
or, Dial the Call Pickup code
#40
.
{
You are connected to the ringing call.
To add another party to a call:
Note: Your conference call can include up to six parties, including yourself.
1. Press
Conf
.
{dial tone}
{
The present call is put on hold.
{
You are given a new call appearance button.
{
All other parties remain connected to each other.
2. Dial the number of the new party and wait for an answer.
3. You can discuss the call privately with the new party at this time. If the line is busy or there is no answer, press
the fluttering call appearance button to return to the call on hold.
4. Press
Conf
again.
{
All parties are now connected.
5. Announce the call.
6. To establish additional conference connections, repeat Steps 1 through 5.
Call Pickup
Conference
Pa
g
e 13 of 31Guide Builder Document
7/24/2005file://C:\Pro
g
ram Files\
g
builder32\win\~5334240.htm