Avaya 8410B - Priority Calling

{confirmation tone}
Note: If a reorder tone is heard, the message is not canceled; try again.
Note: When you are talking on the handset, the Mute feature affects the microphone associated with the handset rather than the speakerphone.
This feature has no effect on an external speakerphone attached to your telephone.
To prevent the other party from hearing you:
1. Press
Mute
.
{
The red light next to
Mute
goes on.
{
The other person cannot hear you.
2. When you are ready to resume your conversation with the other person, press
Mute
again.
{
The red light next to
Mute
goes off.
{
The other person can hear you again.
Note: When the telephone is set for the Speaker (listen-only) feature, the light next to Mute goes on whenever you are using the speaker.
The Mute feature turns off automatically when you hang up, or switch from the speakerphone to the handset, or
from the handset to the speakerphone.
To place a priority call:
1. Press
Priority
while on-hook or off-hook.
or, Dial the Priority Calling code
*59
while on-hook or off-hook.
{dial tone}
2. Dial the extension.
{ringback tone}
{
Wait for the called party to answer.
Note: If
y
our call is not answered and
y
ou wish to redirect it to covera
g
e,
p
ress Go to Cvr while the call is rin
g
in
g
.
Mute
Priority Calling
Pa
g
e 18 of 31Guide Builder Document
7/24/2005file://C:\Pro
g
ram Files\
g
builder32\win\~5334240.htm