Parameter name Default value Description and value range
initiated. 1 or 2 ASCII numeric
digits, "1" through "99".
MYCERTURL " " (Null) URL to be used to contact an
SCEP server. 0 to 255 ASCII
characters, zero or one URL.
MYCERTWAIT 1 Specifies whether the telephone
will wait until a pending certificate
request is complete, or whether it
will periodically check in the
background. 1 ASCII numeric
digit, "0" or "1" as follows:
• 1 = If a connection to the SCEP
server is successfully
established, SCEP will remain in
progress until the request for a
certificate is granted or rejected.
•
0 = SCEP will remain in
progress until the request for a
certificate is granted or rejected
or until a response is received
indicating that the request is
pending for manual approval.
NORTELAUTH 1 Specifies user authentication
method for Nortel security
gateways. 1 ASCII numeric digit.
Valid values are:
• 1= Local credentials
•
2 = RADIUS credentials
• 3 = RADIUS SecurID
• 4 = RADIUS Axent
NVHTTPSRVR 0.0.0.0 VPN and non-VPN. HTTP file
server IP addresses used to
initialize HTTPSRVR the next time
the phone starts up. 0 to 255
ASCII characters: zero or more IP
addresses in dotted decimal or
DNS name format, separated by
commas without any intervening
spaces. As of Software Release
6.1, NVHTTPSRVR is provided for
VPN mode so that a file server IP
address can be preconfigured and
saved in non-volatile memory.
Table continues…
VPN parameters
50 VPN Setup Guide for 9600 Series IP Telephones March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
