Avaya 9600 Series - Page 57

Parameter name Default value Description and value range
• 2 = Password can be
alphanumeric and is stored in
volatile memory but will be
cleared when the phone resets.
• 3 = Password can be numeric
only and is stored in volatile
memory that is cleared
immediately after first-time
password use.
•
4 = Password can be
alphanumeric and is stored in
volatile memory that is cleared
immediately after first-time
password use.
• 5 = Password can be
alphanumeric and is stored in
volatile memory that is cleared
when the user invokes VPN
Sleep Mode and when the
telephone resets.
NVVPNSVENDOR 4 Specifies the IKE implementation
to use. 1 ASCII numeric digit.
Valid values are:
• 1 = Juniper PSK with XAUTH or
Juniper Cert with XAUTH
• 2 = Cisco PSK with XAUTH or
Cisco Cert with XAUTH
• 3 = Checkpoint Security
Gateway
• 4 = Generic PSK
• 5 = Nortel Contivity
• See
VPN configuration
profiles on page 46for
information on automatically-set
parameters based on this
NVVPNSVENDOR setting.
NVVPNUSER " " (Null) Specifies the user name to use
during authentication. 0 to 30
ASCII characters.
NVVPNUSERTYPE 1 Specifies whether the user can
change the VPN username. 1
Table continues…
VPN parameters
March 2015 VPN Setup Guide for 9600 Series IP Telephones 57
Comments? infodev@avaya.com