Ring tone XLS cell descriptions
Cell Name Description Comment
Ringer Name Name of this custom Ring Tone
file, for example, Ringtone 1
This filename will be assigned
a .XML extension upon
completing all required cells and
pressing the "Create xml" cell
button.
Ringer Index This numbers the xml file as one
of the 8 patterns used in
personalized ringing. For
example, index 2 will be the
second personalized ringing
choice a user will have on their
deskphone. Eight xml files with
indices 1-8 need to be created to
customize all the available
personalized ringing choices that
will be presented on a
deskphone. If less than 8 indices/
files are set in the settings file,
Avaya standard ringing patterns
will be used for the missing
indices.
Type of Wave Leave empty; this cell is not
currently used.
Reserved for future use.
Number of Active Frequencies Up to four active frequencies can
be set. Valid values are 1, 2, 3, or
4.
Frequency Values The range of frequency values is
from 0 to 3999Hz.
Number of Notes Number of notes in this ring tone,
from 1 to 3. A note is an interval
in which a frequency is used.
Currently, a custom ring tone has
a 3 note maximum.
Note 1, 2, and 3 This value represents a collection
of frequency intervals that are
grouped together and repeated
over and over again as the ring
tone
Note Pulse State The pulse state has two possible
settings - On or Off
Note Frequency The frequency used for a
particular note.
Table continues…
Customizing ring tones
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 101
Comments on this document? infodev@avaya.com
To Next Page
Loading...
