Parameter name Default value Description System Manager
parameter name
ENABLE_PPM_SOURCE
D_SIPPROXYSRVR
1 Enables PPM as a source of
SIP proxy server information.
Value operation:
• 0: Proxy server information
received from PPM is not
used.
• 1: Proxy server information
received from PPM is used.
NA
SIP_CONTROLLER_LIST
_2
Null Replaces
SIP_CONTROLLER_LIST for
IPv4 and IPv6 phones. It is used
to select the registration
address.
Primary Session
Manager, Secondary
Session Manager, and
Survivability server.
SIMULTANEOUS_REGIS
TRATIONS
3 Specifies the number of
simultaneous Session Manager
and Branch Session Manager
registrations that the phone
must maintain.
Valid values are from 1 to 3.
The value of this parameter
must not be less than the
number of core Session
Manager instances in
SIP_CONTROLLER_LIST.
NA
SIPREGPROXYPOLICY Simultaneous Specifies whether the telephone
will attempt to maintain one or
multiple simultaneous
registrations.
Value operation:
• Alternate: The phone registers
only to the first controller in
the list. If the phone cannot
reach the first controller, the
phone registers to the second
controller .
• Simultaneous: The phone
simultaneously registers to
more than one SIP proxy
controller at the same time.
NA
The primary, secondary, and survivable server settings for a phone must be configured in System
Manager. This enables the phone to access the full list of assigned servers after the phone logs in.
You must provide at least one primary and secondary server to the phone to make the initial login
Parameters for redundancy provisioning
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 125
Comments on this document? infodev@avaya.com
To Next Page
Loading...
