Parameter name Default
value
Description
ADMIN_PASSWORD 27238 Specifies an access code for
accessing the Admin menu.
Valid values are from 6 to 31
alphanumeric characters including
upper case, lower case characters
and special characters. However,
double quote character (“) cannot be
used for a value of this parameter.
Note:
• If this parameter length is set
below 6 or above 31
alphanumeric characters,
then the parameter is treated
as not defined.
• If this parameter is set in the
46xxsettings.txt file,
then it replaces PROCPSWD
parameter.
• If you set
ADMIN_PASSWORD in the
Avaya Aura
®
System
Manager you require at least
Avaya Aura
®
System
Manager 7.1.0.
• Setting this parameter
through PPM is more secure
because this file can usually
be accessed and read by
anyone on the network.
Setting the value in this file is
intended primarily for
configurations with versions
of phone or if server software
that do not support setting
this value from the server.
AMADMIN
Specifies the URI used for WML-
applications under (AVAYA) Menu.
You must specify HTTP server and
directory path to administration file
(AvayaMenuAdmin.txt). Do not
specify the administration file name.
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 157
Comments on this document? infodev@avaya.com
To Next Page
Loading...
