Parameter name Default
value
Description
ALLOW_DND_SAC_LINK_CHANGE 0 Specifies whether to enable DND
and SAC link button in the menu.
Value operation:
• 0: To disable DND and SAC link
button.
• 1: To enable DND and SAC link
button.
Note:
Avaya J159 IP Phone and
Avaya J169/J179 IP Phone
supports this feature.
APPNAME_IN_USE Null Used to check which firmware
version is installed on the phone to
perform a corresponding action, for
example:
IF $APPNAME_IN_USE SEQ
4.0.2.0.11 GOTO CROSSGRADE
ASTCONFIRMATION 60 Specifies the number of seconds
that the phone waits to validate an
active subscription when it
subscribes to the avaya-cm-feature-
status package.
Valid values are 16 through 3600.
Table continues…
List of configuration parameters
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 158
Comments on this document? infodev@avaya.com
To Next Page
Loading...
