Avaya 9600 Series - Chapter 28: Short Codes; Park;Unpark; Call Pickup

Parameter name Default
value
Description
AUDASYS 3 Specifies the audible alerting setting
for the phone.
Value operation:
• 0: Turns off audible alerting. User
cannot adjust ringer volume.
• 1: Turns on audible alerting. User
can adjust ringer volume, but
cannot turn off audible alerting.
• 2: Turns off audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
• 3: Turns on audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
Note:
Avaya J129 IP Phone does not
support this parameter.
AUDIOENV 0 Specifies the audio environment
index and enables you to customize
the phone's audio performance.
Valid values are 0 through299.
This parameter affects settings for
AGC dynamic range, handset and
headset noise reduction thresholds,
and headset transmit gain. Always
consult Avaya before changing this
parameter.
AUDIOPATH 1 Specifies the audio path for the
phone.
Value operation:
• 1: For speaker.
• 2: For headset.
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 159
Comments on this document? infodev@avaya.com